AK AK12001 QUICK CEMENT EXTRA THIN (40ml)
Ultra-thin precision maxoma fiber brush
1. Special density.
2. Glue by capillary action, very quick drying.
The Quick Cement is the fastest and strongest glue on the market. Unlike other plastic adhesives it dries
quickly and allows gluing by capillary action, being very effective in joining parts with little contact surface.
In Stock: 100+ pcs
Dispatch within: 24 hrs
AK AK12002 EXTRA THIN CEMENT (40ml)
Ultra-thin precision maxoma fiber brush
1. Special density.
2. Glue by capillary action, quick drying.
The Extra Thin Cement glues by capillary action with a medium / fast drying time. It is undoubtedly the best option for general assembly work.
In Stock: 50+ pcs
Dispatch within: 24 hrs
AK AK12003 PLASTIC CEMENT STANDARD DENSITY (40ml)
1. Normal density and thicker maxoma fiber brush to glue.
2. Glue by contact, quick drying.
The classic modeling glue with medium drying time and more viscosity. It has a standard application brush for work on larger surfaces and general assembly. Great performance, is indicated for the assembly of plastic models and acts in a few seconds.
In Stock: 10+ pcs
Dispatch within: 24 hrs
AK AK12014 WOLVERINE P.V.A. GLUE (100ml)
With all the properties of white glue and faster drying.
Especially suitable for work on transparent parts and for resistant and invisible joints. to glue wood, paper, cardboard, cork, wicker, polystyrene, foam, etc.
High viscosity extends very smoothly. It can be diluted with water to achieve the desired viscosity.
Apply with temperatures between 10 and 35?C. and a relative humidity of 70% maximum.
Total cure in 6 hours (According to room temperature and applied thickness).
In Stock: 1 pc
Dispatch within: 24 hrs
AK AK12015 MAGNET CYANOCRYLATE GLUE (20g)
– 99% Cyano.
– Ethyl cyanoacrylate
– Use temperature: -55? to 120?
– Set time: between 3 and 10 seconds. The gaps and uneven surfaces can increase this setting time. It is not necessary to use clamps. Holding the pieces firmly for 10-30 seconds will ensure better adhesion.
– Definitive cure time: 24 h
– Viscosity: 110 mPa.S
– Shear strength: 21.0 MPa
* Bottles are not filled at a 100% to leave some air and make it work properly.
In Stock: 10+ pcs
Dispatch within: 24 hrs
AK AK12017 ERASER CLEANER FOR CYANOCRYLATE (EXCESS REMOVER) (20g)
Ideal for small touches once the piece has been glued.
Contain: 20g.
HOW TO USE:
Treat the surface to be cleaned by rubbing with paper towels dipped in ERASER cleaner.
Clean the surfaces, while they are damp, with paper towels, in order to eliminate the remains of the ERASER cleaner.
*? This product may damage the plastic if exposed for too long or too much product is used. Use just enough and use quickly.
* Bottles are not filled at a 100% to leave some air and make it work properly.
In Stock: 8 pcs
Dispatch within: 24 hrs